Cloth Diapering Basics

What should be done to properly care for cloth diapers?

How to properly care for cloth diapers: remove solids, store dry, wash every 2-3 days with a prewash and long main wash, skip softener, and dry gently.

On this page
  1. The Short Answer
  2. Before Washing: Handling Dirty Diapers
  3. The Wash Routine
  4. Choosing a Detergent
  5. Water Hardness
  6. Drying Cloth Diapers
  7. Special Fabrics: Wool and Covers
  8. Prepping New Diapers
  9. Stains, Smells, and When to Deep Clean
  10. Keep Your Washing Machine Clean
  11. Signs Your Routine Is Working

The Short Answer

To care for cloth diapers properly:

  1. Get poop into the toilet before storing the diaper. Exclusively breastfed poop is water-soluble and is usually an exception.
  2. Store dirty diapers dry in a pail or wet bag. Don’t soak them.
  3. Wash every two to three days.
  4. Run a short prewash, then a long, heavy-duty main wash with a full dose of a good detergent.
  5. Skip fabric softener and dryer sheets.
  6. Dry gently. Inserts and cotton can usually go in the dryer. Line-drying covers and shells helps protect their waterproof layer and elastics.

Always check the care instructions from your diaper’s manufacturer, since some brands have specific requirements, especially for warranties. The rest of this guide explains each step, and our complete cloth diaper wash routine goes further still.

Before Washing: Handling Dirty Diapers

Dealing with poop

  • Exclusively breastfed babies: the poop is water-soluble, so many families put these diapers straight in the pail.
  • Formula-fed babies and babies on solids: remove as much poop as you can into the toilet. You can knock it off, scrape it, dunk and swish the diaper in the toilet, or use a diaper sprayer. A disposable liner lets you lift most of it out in one go.

Storing dirty diapers

Keep dirty diapers in a dry pail with a washable liner, or in a hanging wet bag. A lid that isn’t airtight, or a bit of airflow, can help with smells and mildew. Don’t soak diapers in a bucket of water (a “wet pail”). It’s hard on fabric and elastic, can breed bacteria, and an open bucket of water is a drowning hazard for young children.

Unstuff pocket diapers before washing, or as you put them in the pail, so the water can reach every layer.

The Wash Routine

Prewash

Run a short complete cycle, with its own rinse and spin, using a smaller amount of detergent. Many guides suggest about half a normal dose. This removes urine and loose soil so the main wash starts with cleaner water.

Main wash

Run your machine’s longest heavy-duty cycle (or something similar, such as “whites” or “cottons”), using warm or hot water as your diapers’ care labels allow. Use the full detergent dose for a heavily soiled load, following the detergent’s instructions.

The diapers need to rub against each other to get clean. In a top-loader with an agitator, the load should move like a thick stew rather than float in lots of water. In a front-loader, fill the drum about two-thirds to three-quarters full. If you don’t have enough diapers to fill it, add other small items such as baby clothes, towels, or washcloths.

Extra rinses

Opinions differ here. Some cloth diaper educators say a good main wash rinses clean without extra rinses. Others recommend one extra rinse, especially with soft water or if your baby seems to react to detergent residue. Start without extra rinses. Add one if you notice lots of suds in the final rinse or your baby gets irritation where the diaper touches.

Choosing a Detergent

  • Most full-strength mainstream detergents work well on cloth diapers. You don’t need an expensive specialty brand.
  • Avoid detergents that contain fabric softener, as well as soap-based laundry products and homemade detergent mixes. These can leave residue or fail to clean properly.
  • “Free and clear” and plant-based detergents may need a larger dose to get diapers fully clean.
  • Use HE detergent in HE machines.

Avoid dryer sheets and scent boosters too. They coat fibers and can reduce absorbency.

Water Hardness

Hard water contains more calcium and magnesium. Over time these minerals can build up in diaper fibers and trap residue. That can lead to smells, rashes, or diapers that stop absorbing.

Test strips are an inexpensive way to check your water hardness. If you have moderately hard to hard water, adding a water softener product to the wash can help your detergent work. Follow the softener’s directions.

Drying Cloth Diapers

  • Dryer: inserts, prefolds, flats, and fitteds are usually fine on a normal setting. Many brands also allow covers and shells on low heat. Check your labels.
  • Line-drying: gentler on PUL and elastic. Dry shells and covers “hot dog” style, folded over a line or rack, so the elastics aren’t stretched.
  • Let things cool before you stretch them. Pulling on warm elastic can damage it.
  • Sun: sunlight can fade stains. Don’t leave covers baking in strong sun for long periods.
  • Stiffness: line-dried cotton and hemp can feel stiff. A few minutes in the dryer softens them, or you can shake them out firmly.

Special Fabrics: Wool and Covers

Wool covers need different care from the rest of your stash. Hand-wash them in lukewarm water with a wool wash, and lanolize them every so often to restore water resistance. Never put wool in the dryer. Wool doesn’t need washing after every use. If it isn’t soiled, airing it out between uses is often enough.

PUL and TPU covers can usually be washed with the rest of the diapers. Many can be wiped clean and reused between changes when they’re only wet.

Prepping New Diapers

New diapers need washing before first use:

  • Synthetics (microfiber, polyester shells, PUL covers): usually one wash.
  • Natural fibers (cotton, bamboo, hemp): several washes, often with drying in between, to remove natural oils and build absorbency. Unbleached cotton and hemp may take more cycles.

Follow the maker’s guidance. If water beads on the fabric rather than soaking in, keep washing. Natural fibers often keep getting more absorbent over the first few weeks of normal use.

Stains, Smells, and When to Deep Clean

  • Stains are normal and don’t necessarily mean a diaper is dirty. Sunlight or a regular laundry stain remover can help.
  • Ammonia smell, or stink that comes back as soon as a diaper is wet, usually means the diapers aren’t getting fully clean. Try more detergent, a longer or hotter main wash, better agitation, or treating hard water first.
  • “Stripping” and sanitizing (for example, with diluted bleach as directed by a diaper maker) are troubleshooting steps for a specific problem, such as persistent smells, mineral buildup, a secondhand stash, or after a yeast rash. They aren’t meant to be part of a regular routine. Follow your manufacturer’s instructions, because harsh treatments can shorten diaper life. If your baby has a rash that keeps coming back, check with your pediatrician.

Keep Your Washing Machine Clean

Residue builds up inside washers over time. Run your machine’s cleaning cycle regularly as the manual suggests, clean the filter if your machine has one, and leave the door open between loads to help it dry.

Signs Your Routine Is Working

  • Clean diapers smell like nothing, or just like clean laundry
  • Diapers absorb quickly when wet
  • No strong ammonia smell when you change your baby
  • No persistent rash linked to the diapers

If you’re new to all of this, our beginner’s guide to cloth diapering basics puts the wash routine in context. Our cloth diapering essentials checklist lists the laundry supplies worth having. If you need a rash cream, see our guide to rash creams safe for cloth diapers to avoid buildup.

The complete guide to cloth diapering basics

Cloth Diapering Basics: A Beginner's Guide to Using Cloth Diapers
Read the guide

Keep exploring

Guides from other topics

All topics →