Washing

How to Wash Cloth Diapers: A Complete Wash Routine

A step-by-step cloth diaper wash routine: storing, removing solids, prewash, hot main wash, detergent dosing, drying with dryer balls, and fixing problems.

On this page
  1. The short version: a basic cloth diaper wash routine
  2. Before the first wash: prepping new diapers
  3. Between washes: storing dirty diapers
  4. Step 1: Remove solids
  5. Step 2: Run a prewash
  6. Step 3: Run a long, hot main wash
  7. Choosing a detergent and dosing it
  8. Step 4: Drying cloth diapers
  9. What to keep out of the diaper wash
  10. Can you wash cloth diapers with regular clothes?
  11. How often should you wash?
  12. Wool covers are different
  13. When the routine isn’t working: troubleshooting
  14. The honest downsides of washable cloth diapers

The short version: a basic cloth diaper wash routine

Most cloth diaper wash routines that work share the same basic shape:

  1. Store dirty diapers dry, in a pail or wet bag, for up to two or three days.
  2. Remove solids into the toilet once poop is no longer water-soluble.
  3. Prewash with a short cycle and some detergent to flush out most of the urine and mess.
  4. Main wash with a long, warm-to-hot cycle, a full dose of a capable detergent, and a properly filled drum.
  5. Dry the inserts in the dryer or on a line, and line dry or low-heat dry the covers and anything with waterproof fabric.

That’s the whole routine. The details are what separate fresh diapers from stinky ones: how full the machine is, how much detergent you use, how hard your water is, and what you keep out of the wash. The rest of this guide goes through them.

Always check the care instructions from your diaper’s maker as well. Brands differ on maximum water temperature, dryer heat and approved additives, and some tie their warranty to following them.

Before the first wash: prepping new diapers

New diapers usually need washing before first use, and how much depends on the fabric.

  • Synthetic fabrics (microfiber, microfleece, suedecloth, PUL covers) generally need just one wash to remove manufacturing residue.
  • Natural fibers (cotton, hemp, bamboo viscose) contain natural oils that limit absorbency at first. They usually need several washes, and some take more, before they reach full absorbency. Hemp is known for taking the longest. You can usually start using them after a wash or two, but they’ll absorb more over the first few weeks.

Wash unbleached natural fibers separately from synthetics for the first wash or two, so the oils they release don’t settle on your other diapers. Check the maker’s instructions here too, since some brands give specific prep steps.

Between washes: storing dirty diapers

Most modern guidance favors a dry pail: put dirty diapers straight into a lidded pail, an open hamper, or a hanging wet bag, without soaking them in water. Wet pails full of water are widely discouraged. They’re a drowning hazard for young children, they’re heavy and messy to empty, and the water can grow bacteria.

Some airflow helps. A tightly sealed container can trap moisture and make ammonia smells worse. Our guide to diaper pails for cloth diapers compares common setups, including the Ubbi and the Diaper Genie.

Unstuff pocket diapers and separate inserts before they go in the pail. It makes the wash more effective and saves you handling dirty inserts later.

Step 1: Remove solids

What you do with poop depends on your baby’s diet:

  • Exclusively breastfed poop is water-soluble, and many brands and experienced cloth diaperers put these diapers straight in the pail without rinsing.
  • Formula-fed poop is thicker. Many parents remove what they can before storing it.
  • Once solids start, poop needs to go into the toilet before the diaper goes in the pail.

A diaper sprayer, a dedicated scraper, or a liner all make this easier. We cover the options in detail in dealing with cloth diaper poop, and if you want to skip most of the scraping, see how to use disposable liners for cloth diapers.

Step 2: Run a prewash

The prewash is a short cycle that removes most of the urine and soiling, so the main wash starts with cleaner water.

  • Use a short or quick cycle. Many people use warm water, but cold is common too.
  • Add some detergent. Many routines use about the amount you’d use for a lightly soiled load. A plain rinse with no detergent does less.
  • The prewash should be just the diapers. Don’t add other laundry yet.

Step 3: Run a long, hot main wash

This is where the real cleaning happens. Pick your machine’s longest, most thorough cycle that the diapers’ care label allows. On many machines that’s “heavy duty,” “normal” with extra soil, or “cottons.”

Load size and agitation

Diapers get clean by rubbing against each other. A drum with only a few diapers sloshing around won’t scrub well, and an overstuffed drum can’t move enough.

  • Front loaders and high-efficiency (HE) machines: a common target is a drum about two-thirds to three-quarters full after the prewash, loosely filled.
  • Top loaders with an agitator or impeller: a common target is diapers moving freely in the water, often described as a loose “stew” rather than a thin “soup.”

If you don’t have enough diapers to fill the drum, add small items like baby clothes, washcloths or hand towels. These are called bulking items. Large adult towels can tangle and wrap around diapers, so smaller items usually work better.

Water temperature

Warm-to-hot water helps detergent work on body oils and soiling. Many diaper brands allow hot main washes, but maximum temperatures vary, and waterproof covers are often rated lower than inserts. Use the warmest setting your care labels allow.

Very hot “sanitize” cycles and frequent high-heat drying can shorten the life of elastic and waterproof laminate, so they’re best saved for occasional sanitizing rather than every wash.

Top loaders vs front loaders

Both can wash diapers well. Top loaders tend to use more water and agitate harder. HE front loaders use less water, so getting the load size right matters more. If your HE machine lets you pick a heavier soil level or extra water, try those for the main wash. An extra rinse is optional. Many routines don’t need one, but it can help if you can still see suds or have very sensitive skin to deal with.

Choosing a detergent and dosing it

A strong mainstream detergent, used at a full dose, is what most current cloth diaper guidance recommends. Specialty “cloth diaper” detergents can work too, but some older recipes were too weak for the job.

  • Use enough. An old myth said cloth diapers need only a tiny scoop. Underdosing is one of the most common causes of lingering ammonia and stink. A common starting point is the dose the detergent label recommends for a heavily soiled load, adjusted for your water.
  • Powder or liquid both work. Many cloth diaperers prefer powders, especially in hard water, because they often contain water softening ingredients. See our breakdown of Tide Original Powder for cloth diapers for one popular example.
  • Avoid built-in fabric softener. “With softener” or “plus Downy” versions coat fibers.
  • Avoid homemade soap-based “detergents” made from grated bar soap. Soap can leave residue on synthetic fabrics and doesn’t handle hard water well.

If you or your baby have sensitivities, there are fragrance-free and dye-free detergents that still clean well. We look at the main concerns in why some people avoid Tide detergent.

Hard water changes the dosing a lot. If your water is hard, you’ll likely need more detergent, a water softening additive, or both. Our guide to washing cloth diapers in hard water explains how to test your water and adjust.

Step 4: Drying cloth diapers

  • Covers, PUL pockets and all-in-ones: many brands recommend line drying or a low dryer setting. High heat over time can wear out elastic and waterproof laminate.
  • Inserts, prefolds and flats made of cotton, hemp or bamboo usually handle the dryer well, though check the label.
  • Line drying saves energy and is gentle. Sunlight also fades stains. See sunning cloth diapers to remove stains. Line-dried natural fibers can feel stiff. A few minutes in the dryer or a good shake softens them.

Thick hemp inserts and all-in-ones can take a long time to dry. Make sure they’re fully dry before storing them, since damp fabric can develop mildew.

Using dryer balls with cloth diapers

Wool dryer balls are a popular addition to the cloth diaper dryer. They tumble between the inserts, help separate them, and may shorten drying time a little. Unlike dryer sheets, they don’t leave a coating on the fabric.

A few pointers:

  • Dryer ball makers commonly suggest several balls, often three for a small load and more for a large one.
  • Many cloth diaper parents skip essential oils on dryer balls. The oils can transfer to fabric, and some brands caution against oils on waterproof or synthetic materials. Unscented wool is the safe default.
  • Don’t use dryer sheets, even “natural” ones, with diapers.

If you don’t have dryer balls, other things do the same job. See what to use instead of dryer balls.

What to keep out of the diaper wash

  • Fabric softener and dryer sheets. They coat fibers, which reduces absorbency and can make stay-dry fabrics repel liquid.
  • Diaper creams that aren’t cloth-safe. Petroleum, zinc oxide and some other ingredients can build up on fabric and cause repelling. Use a liner or a cloth-safe cream.
  • Too much of any additive. Vinegar, essential oils, baking soda and similar add-ins are often recommended online, but most routines don’t need them. Some brands warn against them because they can affect elastic or waterproof layers, or simply don’t help.
  • Bleach in every wash. Bleach is useful occasionally for sanitizing. It isn’t part of a normal routine. See how to bleach cloth diapers safely.

Can you wash cloth diapers with regular clothes?

Yes, with a sensible order. Run the prewash with diapers only, so the dirtiest water drains away first. After that, many families add the household’s regular laundry to the main wash, especially baby clothes and small items, which also work as bulking items.

Things to watch:

  • Don’t add anything to that load that needs fabric softener or a detergent with softener in it.
  • If someone in your home has a weakened immune system or there’s a stomach bug going around, keeping diaper loads separate is the more cautious choice.
  • Delicates that can’t handle a long, hot cycle don’t belong in the diaper load.

How often should you wash?

Every two to three days is the usual recommendation. Waiting longer gives bacteria more time to break urine down into ammonia, and dried-in soiling is harder to remove. Plan your stash with that rhythm in mind: newborns go through a lot of diapers per day, so washing every other day is common early on.

Wool covers are different

Wool covers don’t go in the regular diaper wash. Wool is a protein fiber, and the enzymes in most mainstream detergents can damage it, as can hot water and agitation. Wool covers are usually hand-washed with a wool wash and re-lanolized now and then. Between washes they can often be aired out and reused if they aren’t soiled.

When the routine isn’t working: troubleshooting

Most problems trace back to the wash routine: too little detergent, too few diapers in the drum, too short a cycle, or hard water.

Problem Likely causes Where to start
Sharp ammonia smell Underwashing, low detergent, long storage, hard water Why do my cloth diapers smell like ammonia?
Diapers feel stiff, dingy, or stink right after washing Mineral buildup from hard water Washing cloth diapers in hard water
Repelling or leaks after a routine fix Mineral or residue buildup How to strip cloth diapers with RLR
Yeast rash, secondhand diapers, persistent stink Need to sanitize How to bleach cloth diapers safely
Poop stains Normal, mostly cosmetic Sunning cloth diapers

Fix the routine first. A one-time strip or bleach soak can reset the diapers, but if the underlying routine doesn’t change, the problem usually comes back.

For any persistent rash, especially one that looks like a chemical burn or a yeast infection, check with your pediatrician rather than relying on laundry changes alone.

The honest downsides of washable cloth diapers

Cloth diapers are still widely made and sold, and modern versions are much easier than the folded flats and pins of past generations. They still involve trade-offs worth knowing about:

  • Laundry time. Expect a diaper load every two or three days, plus folding or stuffing.
  • A learning curve. Getting a routine dialed in for your machine and water can take some trial and error.
  • Upfront cost. A full stash costs more at the start than a pack of disposables, even if it can cost less over time.
  • Water and energy. Washing uses water and electricity. Line drying and full loads reduce this.
  • Bulk. Cloth diapers are thicker than disposables, which can affect how clothes fit.
  • Childcare acceptance. Some daycares don’t accept cloth diapers (see cloth diapering at daycare).

Many families find these trade-offs manageable, and plenty use cloth part-time, such as cloth at home and disposables on outings or overnight. A routine that works for your machine and your water is the biggest factor in whether cloth feels easy or frustrating.

Keep exploring

Guides from other topics

All topics →