Diaper Types

Snappi vs Diaper Pins: Fastening Flats and Prefolds

Snappi or diaper pins? How each fastener works with flats, prefolds and snapless fitteds, safety habits, care and replacement, and when you need no fastener.

On this page
  1. Do You Need a Fastener at All?
  2. How a Snappi Works
  3. How Diaper Pins Work
  4. Comparison Table
  5. Safety Habits
  6. Which Fabrics and Folds Suit Each
  7. Other Options
  8. Care and Replacement

If you use flats, prefolds or snapless fitted diapers, you’ll eventually choose how to hold them on. The two classic options are the Snappi, a stretchy T-shaped fastener with grippy teeth, and diaper pins, safety pins with a locking head. Both work. Snappis are faster and avoid sharp points. Pins can hold more securely on some fabrics and last for many years.

Do You Need a Fastener at All?

Not always. If you trifold or pad fold a prefold or flat and lay it inside a cover, the cover holds it in place. No fastener is needed. Many parents use this method from the newborn stage onward. See flats and prefolds for folding methods.

A fastener helps when you:

  • Use a wrapped fold such as the angel wing, which contains runny newborn poop well
  • Want to use a breathable cover like wool or fleece, where a wrapped, fastened diaper stays put better
  • Use snapless fitted diapers
  • Want the diaper to stay in place on a very active baby

How a Snappi Works

A Snappi is a T- or Y-shaped piece of stretchy material with small plastic teeth at each end. To use one:

  1. Wrap the diaper around your baby, bringing the front up between the legs.
  2. Hook one side of the Snappi into one wing of the diaper at the waist.
  3. Stretch it across and hook the other side into the other wing.
  4. Pull the bottom of the T down and hook it into the front panel.

The teeth grip the fabric. The stretch keeps the diaper snug while letting your baby move. Snappis come in more than one size, typically a smaller one for babies and a larger one for toddlers, so check the size guide.

How Diaper Pins Work

Diaper pins are large safety pins with a plastic head that locks closed, so they’re harder to open accidentally than ordinary safety pins. To pin a diaper:

  1. Wrap the diaper around your baby.
  2. Slide two fingers between the diaper and your baby’s skin where you’ll pin. If the pin slips, it meets your fingers, not your baby.
  3. Push the pin through the layers sideways, pointing away from the belly, then close and lock the head.
  4. Repeat on the other side.

Many parents run pins through a bar of soap now and then so they slide through fabric more easily.

Comparison Table

Snappi Diaper pins
Speed Faster for most people Slower, especially at first
Sharp points None, though teeth can scratch fingers Yes
Hold Good on most cotton and bamboo Very secure on most fabrics
Fabric compatibility Grips some fabrics better than others Works on almost anything
Lifespan Stretch material wears out over time Can last for years
Ease for caregivers Usually easier to learn Some caregivers are nervous using them

Safety Habits

With pins

  • Always keep your fingers between the pin and your baby’s skin while pinning.
  • Point pins sideways or away from the belly, never toward it.
  • Check that the locking head is fully closed.
  • Throw away pins with bent points or loose heads.
  • Store pins safely out of reach. Like any small item, they’re a hazard for little ones.

With Snappis

  • Inspect them regularly for cracks, stretched-out arms or loose teeth.
  • Replace a Snappi that has lost its stretch or has damaged teeth.
  • Store them where a baby can’t chew them.

Always follow the manufacturer’s safety instructions for any fastener.

Which Fabrics and Folds Suit Each

  • Snappis generally grip well on woven cotton prefolds, birdseye and muslin flats, and terry. Some parents find they grip less reliably on very thin, very slick or very tightly woven fabrics, or on fabrics with a lot of stretch. If the teeth keep slipping, try a different fold so there’s more fabric at the grip points, or switch to pins.
  • Pins work on almost any fabric and any number of layers, but thick prefolds and multiple layers can be hard to push through.
  • Wrapped folds like the angel wing and newspaper fold work with either.
  • Snapless fitteds often come with a recommendation for a Snappi but can be pinned.

Other Options

  • Boingo-style fasteners: A two-piece fastener with grippers at each side, used in pairs. Some parents find them easier to adjust than a Snappi.
  • Fitteds with closures: If fastening is the sticking point, a fitted diaper with snaps or hook and loop avoids separate fasteners altogether.
  • Covers with a snug fit: Many wrap covers hold a pad-folded prefold well enough that no fastener is needed.

Care and Replacement

  • Snappis: Wash them with your diapers or rinse and air dry. Over time the stretchy material can weaken, especially with high heat, so plan to replace them occasionally. Having a few spares means you’re not stuck when one wears out.
  • Pins: Wipe clean and store in a safe container or pincushion. Discard any that become bent or don’t lock.

If you’re building a prefold stash, our guide on how many prefolds you need includes suggested fastener counts. For closures on modern diapers, see snaps vs hook and loop. For an overview of every cloth diaper type, see cloth diaper systems explained.

The complete guide to diaper types

Cloth Diaper Systems Explained: Finding the Best Type for Your Baby
Read the guide

Keep exploring

Guides from other topics

All topics →