All-in-one (AIO) cloth diapers are the closest cloth gets to a disposable. The waterproof shell and absorbent layers are sewn together. You put it on, take it off and toss the whole thing in the wash. That simplicity is why AIOs are often what parents choose for daycare, babysitters and anyone new to cloth.
What an All-in-One Cloth Diaper Is
An AIO has three parts in one piece:
- A waterproof outer of PUL or TPU
- Absorbent layers of microfiber, cotton, bamboo, hemp or a blend
- Often a stay-dry lining, such as microfleece or suede cloth, that keeps the surface feeling drier against skin
Most AIOs are one-size, with rise snaps that adjust the length, and close with snaps or hook and loop. Some are sized, especially newborn AIOs.
Pros and Cons of AIOs
Pros
- One step to put on, with no stuffing, folding or snapping in
- Easiest for caregivers who don’t use cloth
- Usually trim and tidy-looking compared with prefolds and covers
- No pieces to lose or match up after laundry
Cons
- Highest cost per change, since you need a full diaper for every change
- Slowest to dry, especially designs with thick sewn-in layers
- Harder to customize for heavy wetters or nights, though many AIOs accept a booster
- Harder to clean thoroughly if the absorbent layers are fully enclosed
- If the shell wears out, the absorbency goes with it, and vice versa
AIO Designs and Why They Matter for Drying
Not all AIOs are built the same, and the design affects drying time and cleaning more than almost anything else:
- Fully sewn-in: Layers are stitched in all around. These are the trimmest and simplest, but the slowest to dry.
- Flaps or tongues: Absorbent layers are sewn down at one end and loose at the other, so they can be flipped out to dry. The bumGenius Freetime and several natural-fiber AIOs use this approach.
- Snap-in soakers: A soaker snaps into the shell, so it can be removed for washing and drying. The GroVia O.N.E. is one example. These blur the line with AI2 systems.
- Pocket opening as well: Some AIOs include a pocket so you can add a booster, combining features of pocket diapers.
If you line dry or have a slow dryer, flap or snap-in designs are usually easier to live with.
Fabrics: Microfiber vs Natural Fibers
Microfiber absorbs fast and dries relatively quickly. It can release moisture under pressure, which causes “compression leaks.” Some parents also find it holds odors more readily over time.
Natural fibers such as cotton, bamboo and hemp hold more under pressure and tend to rinse clean well. They often take longer to dry and may need a few washes before reaching full absorbency.
Stay-dry linings like microfleece help keep skin feeling drier and let solids roll off more easily. Natural-fiber surfaces feel damp when wet. Some parents prefer that, and some babies with sensitive skin do better with one or the other.
Well-Known All-in-One Diapers
Models and specifications change over time, so check the manufacturer’s current product page before buying.
GroVia O.N.E.
The O.N.E. is a one-size AIO marketed for roughly 10 to 35+ pounds, with a larger toddler version also available. Features often highlighted:
- An “Outlast” closure system that lets you switch between hook and loop and snaps
- No-prep fabrics, so it can be used after a single wash
- Two snap-in soakers, a larger and a smaller one, so you can adjust absorbency and dry them separately
- Microfiber absorbency with a microfleece stay-dry top layer
Parents who like it praise the absorbency for an AIO, the closure flexibility and the ease for caregivers. Some reviewers find it bulky on small babies, report elastics loosening over time, or prefer natural-fiber diapers to avoid microfiber odor issues. As with most diapers, experiences vary with the baby’s build and the wash routine.
Thirsties Natural One Size All in One
A natural-fiber AIO with an organic cotton body and hemp/cotton soaker layers, offered with snaps or hook and loop and marketed for roughly 8 to 40 pounds. Often recommended for families who want natural fibers in a one-step diaper.
bumGenius Freetime
A long-running AIO with two flaps of absorbency sewn at one end, a stay-dry lining and a side “butterfly” closure. It’s often described as easy for caregivers and quick drying for an AIO.
Smart Bottoms Smart One
An organic cotton AIO designed to dry faster than a fully sewn-in natural-fiber diaper, marketed for roughly 10 to 35 pounds.
Newborn AIOs
One-size AIOs are often too bulky for very small babies. Newborn-size AIOs, such as the Kanga Care Lil Joey and several other brands’ newborn lines, are made to fit roughly 4 to 12 pounds. Some include a snap-down front for the umbilical cord stump. Many families use them for only a few weeks to a few months, so renting or buying secondhand is common.
How to Choose the Right AIO for Your Baby
- Baby’s build: Slim babies often need strong leg elastic or gussets. Chunky thighs need roomier leg openings. If you can, try one before buying many.
- Your drying setup: Line drying favors flaps or snap-in soakers.
- Fiber preference: Microfiber for fast absorption and quick drying, natural fibers for capacity and easy cleaning.
- Closure: Hook and loop for speed and caregiver ease, snaps for durability. See snaps vs hook and loop.
- Sizing: One-size for long use, sized for better fit at each stage. See one-size vs sized.
- Nights: Few AIOs last a full night alone. Check whether you can add a booster, or plan a different overnight setup (see what diaper holds the most pee overnight).
Caring for AIOs
- Flip out flaps or unsnap soakers before washing so water reaches every layer.
- Fasten hook and loop laundry tabs.
- Follow the brand’s drying guidance, since some recommend line drying the shell.
- Make sure thick AIOs are completely dry before storing them. Damp layers can develop odors.
A good fit makes more difference than brand. Our guide to adjusting rise snaps helps with that. For how AIOs compare with other systems, see cloth diaper systems explained.