Inserts

Is microfiber cloth safe for babies?

Is microfiber safe for babies? Microfiber diaper inserts are widely used, but shouldn't touch skin. Here's why, which polyester fabrics are fine and when to see a doctor.

On this page
  1. The Short Answer
  2. Why Microfiber Shouldn’t Touch a Baby’s Skin
  3. Not All Polyester Baby Fabrics Are the Same
  4. How to Use Microfiber Inserts Safely
  5. What About Household Microfiber Cloths and Towels?
  6. Chemical Safety and Microplastics
  7. When a Diaper Rash Needs a Doctor

The Short Answer

Microfiber cloth diaper inserts are widely used and are generally considered fine when used as intended: inside a pocket diaper, or underneath another layer so the microfiber itself doesn’t touch the baby. Cloth diaper makers and experienced users consistently advise against putting microfiber directly against a baby’s skin, because it can draw moisture out of the skin and leave it dry or irritated.

Household microfiber cleaning cloths are a different matter. They aren’t designed for use on babies and shouldn’t be used as diapers, wipes or washcloths, especially if they’ve been used with cleaning products.

Why Microfiber Shouldn’t Touch a Baby’s Skin

Microfiber terry, the fabric used in absorbent inserts, is made of extremely fine polyester-based fibers. It’s very good at pulling liquid into the tiny spaces between those fibers, which is exactly why it absorbs so fast. Against skin, that same wicking effect can pull moisture from the skin itself. Many parents report dry, rough or red skin when microfiber has touched their baby directly.

This is why microfiber is used almost entirely inside pocket diapers, where a soft lining sits between the insert and the baby. It’s also why bare microfiber shouldn’t be laid into a cover or an all-in-two system, where the insert touches the skin.

Not All Polyester Baby Fabrics Are the Same

“Microfiber” is often used loosely. Several polyester fabrics show up in cloth diapering, and they behave differently:

Fabric What it’s for Against skin?
Microfiber terry Absorbent insert core No: keep it inside a pocket or under another layer
Microfleece Stay-dry lining or liner Yes: designed for skin contact
Suedecloth Stay-dry lining or liner Yes: designed for skin contact
Athletic wicking jersey Stay-dry lining or liner Yes: designed for skin contact
Minky Soft outer fabric, some inserts Generally yes
Charcoal bamboo outer Outer layer of “charcoal” inserts Usually yes, but the core is often microfiber

So a pocket diaper with a microfleece lining and a microfiber insert inside is a normal, intended setup. The lining touches the baby, not the insert. Our guide to cloth diaper insert types explains each material in more depth.

How to Use Microfiber Inserts Safely

  • Keep microfiber inside the pocket, or under a natural-fiber or stay-dry layer.
  • Don’t let it poke out of the pocket at the legs or waist, where it might rub skin.
  • Wash it thoroughly. Microfiber can hold on to ammonia and detergent residue, which can make diapers smell. Ammonia build-up is a commonly cited contributor to diaper irritation.
  • Replace inserts that have gone stiff or “crunchy,” or that stay smelly even after a good wash.
  • Avoid fabric softener, which coats fibers and reduces absorbency.

If you’d prefer to avoid microfiber altogether, cotton, bamboo and hemp inserts can all sit against skin. See cotton vs microfiber inserts for how they compare.

What About Household Microfiber Cloths and Towels?

  • Microfiber cleaning cloths are made for cleaning surfaces and may carry residue from cleaning products. Keep them separate from baby laundry, and don’t use them on a baby’s skin.
  • Microfiber bath or hair towels can be used as an inner layer in DIY cloth diaper inserts, but only where they can’t touch the baby. Natural fabrics are a simpler choice for anything that touches skin.
  • Baby washcloths and towels sold for infants are typically cotton, bamboo or soft polyester fabrics designed for skin contact. Follow the product’s guidance.

Chemical Safety and Microplastics

  • Chemical safety: if you want reassurance about what’s in a fabric, look for OEKO-TEX Standard 100 certification, which means the textile has been tested for a range of harmful substances. Wash new items before first use.
  • Microplastics: like other synthetic fabrics, microfiber sheds tiny plastic fibers in the wash. That’s mainly an environmental concern rather than a known direct risk to your baby, but it’s one reason some families prefer natural-fiber inserts.

When a Diaper Rash Needs a Doctor

Most diaper rashes are mild and improve with frequent changes, gentle cleaning and time without a diaper. If you think microfiber contact caused irritation, move it back inside the pocket or switch to natural fibers and see whether things improve.

Contact your pediatrician or another healthcare professional if a rash:

  • Doesn’t improve after a few days of home care, or keeps getting worse
  • Has blisters, open sores, pus or bleeding
  • Spreads beyond the diaper area
  • Comes with fever, unusual fussiness or other signs your baby is unwell
  • Appears in a very young baby and you’re unsure what it is

Trust your instincts: if something seems wrong, it’s always reasonable to check with a professional.

The complete guide to inserts

Types of Cloth Diaper Inserts: Materials and How They Compare
Read the guide

Keep exploring

Guides from other topics

All topics →