Can You Make Your Own Cloth Diaper Inserts?
Yes. Homemade inserts can work as well as store-bought ones, and some don’t need any sewing at all. The key is choosing fabrics that actually absorb, preparing them properly, and building inserts that fit your diapers without adding too much bulk.
Fabrics That Work Well
| Fabric | Absorbency | Against skin? | Drying | Notes |
|---|---|---|---|---|
| Flour sack towels (100% cotton) | Moderate | Yes | Fast | Cheap, easy, no sewing needed |
| Cotton flats or birdseye | Moderate | Yes | Fast | Fold to size |
| Cotton T-shirts (jersey) | Moderate | Yes | Moderate | Use several layers; good for repurposing |
| Cotton flannel (e.g., receiving blankets) | Moderate | Yes | Moderate | Soft; needs multiple layers |
| Cotton terry (towels) | Moderate to high | Yes | Slow | Can be bulky |
| Hemp fleece or hemp jersey | Very high | Yes | Slow | Trim; popular for night inserts |
| Bamboo fleece or bamboo velour | High | Yes | Slow | Soft; good top layer |
| Zorb | High | Check version | Moderate | Engineered absorbent fabric for home sewing; often sandwiched inside |
| Microfiber towels | Fast, low capacity | No | Fast | Only as an inner layer that can’t touch skin |
Natural fibers such as cotton, hemp and bamboo are the most forgiving because they can sit against skin. If you’re unsure how they compare, our guide to cloth diaper insert types covers each material.
Fabrics to Avoid
- Polyester fleece as the absorbent part. Fleece blankets and microfleece are water-resistant. They’re useful as a stay-dry top layer or a cover, but they won’t soak anything up.
- Fabrics with water-repellent or stain-resistant finishes, such as some tablecloths and outdoor fabrics.
- Fabrics with heavy fabric softener residue unless you’ve washed them thoroughly first. Softener can make fabric repel liquid.
- Worn-through fabric with holes or thin patches, which can tear in the wash.
- Anything with buttons, appliqués, glitter or loose decorations.
- Microfiber where it can touch the baby. It can dry out and irritate skin. See whether microfiber is safe for babies.
No-Sew DIY Inserts
If you don’t sew, these work immediately:
- Flour sack towel pad fold: fold the towel in thirds lengthwise, then fold to the length of your pocket or cover. Add an extra fold at the front or middle if your baby needs more absorbency there.
- Folded flats: the same idea. A flat diaper is basically a large, absorbent single-layer cloth.
- Prefolds: pad-fold a prefold in thirds and lay it in a cover or stuff it in a pocket.
- Old cotton T-shirts: cut off the sleeves and fold the body into a pad. Several layers are usually needed.
- Cotton washcloths: folded in half or thirds, they make a quick doubler.
No-sew inserts unfold flat to wash and dry, which makes them some of the fastest-drying options.
How to Sew a Basic Insert
Prewash the Fabric
Wash and dry natural fabrics hot, several times, before cutting. This removes natural oils and finishes, starts building absorbency, and lets the fabric shrink before you size it. Hemp in particular can shrink noticeably. Our guide to prepping new inserts explains why this matters.
Choose a Size
Measure the inside of your pocket diaper or cover rather than relying on a standard size. As a rough starting point, many DIY tutorials use finished sizes around:
- Newborn or small: about 4 x 10 inches
- Medium: about 5 x 12 inches
- Large or toddler: about 5 x 14 inches
The insert should lie flat without bunching and stay fully inside the cover, with nothing poking out at the legs or waist.
Decide How Many Layers
It depends on the fabric’s thickness and how much absorbency you need:
- Thick knits (hemp fleece, bamboo fleece): try 3–4 layers for daytime to start.
- Thinner wovens or jersey (flannel, T-shirt cotton): you’ll usually need more layers.
- For nights: add more layers or make a separate doubler, rather than one very thick insert that won’t dry.
Start conservatively, test, and adjust.
Stack, Sew and Finish
- Stack your layers. Put a soft, skin-friendly fabric (cotton or bamboo) on the side that will face the baby, and any microfiber or Zorb in the middle so it can’t touch skin.
- Sew around the edges. Options include a serger, a zigzag stitch on a regular machine, or sewing the layers inside-out, turning them, and topstitching around the edge.
- Add a line of stitching down the middle or in a box pattern to stop layers shifting in the wash.
- Trim threads and check that no edges are fraying.
Faster-Drying Designs: Petal and Snake Inserts
Thick sewn pads can take a long time to dry, especially hemp. Two designs help:
- Petal inserts: sew two or three separate layers together at one end only. They lie stacked in the diaper but fan open to dry.
- Snake inserts: a long strip of fabric folded into layers when you use it, then laid out flat to wash and dry.
Making Doublers from Scraps
Leftover hemp, bamboo or cotton scraps make good doublers: smaller, thinner pads placed under your main insert. A trim hemp doubler is one of the most useful things you can make for heavy wetters.
Testing and Adjusting Your Inserts
- Pour test: pour a measured amount of water slowly onto the insert, wait, then press firmly. If water runs off, the top layer is too slow. If it squeezes out, it may be under-prepped or too thin.
- Real-world test: use it for a normal change and check how wet each part is.
- Adjust: add a layer, swap the top fabric, or move absorbency toward the front or middle.
For tips on stacking homemade inserts with store-bought ones, see how to layer cloth diaper inserts.
Is DIY Actually Cheaper?
Usually, but not always:
- Repurposed fabric (old towels, T-shirts, receiving blankets) and flour sack towels are very cheap.
- Specialty fabrics like hemp fleece, bamboo fleece and Zorb can cost about as much as buying finished inserts once you count your time and any wasted fabric.
DIY makes the most sense if you already sew, already own suitable fabric, or need an unusual size.
Safety Notes
- Use clean fabrics only, and wash them well before use.
- Avoid buttons, decorations or anything that could come loose.
- Check homemade inserts regularly for loose threads or fraying, and repair or retire them.
- Keep microfiber layers fully enclosed or under a natural layer.